AFE Power
advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.
-
aFe Momentum Intake Replace Air Filter w/P5R Media - 7x4.75in F / 9x7in B / 7.25x5in T (Inv) / 8in H
aFe Momentum Intake Replace Air Filter w/P5R Media - 7x4.75in F / 9x7in B / 7.25x5in T (Inv) / 8in HConstructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter is our highest flowing media for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for...Regular price $97.99 USDRegular priceUnit price per -
aFe is proud to announce the MACH Force-Xp cat-back exhaust system for the 2012-2117 Jeep Grand Cherokee SRT/SRT8 with the V8-6.4L HEMI engine. This exhaust system is constructed out of mandrel-bent 304 stainless steel tubing for unrestricted flow and is MIG-welded for strength and...Regular price $2,461.99 USDRegular priceUnit price per
-
The serrated/helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber, resulting in increased performance and improved throttle response. The serrated/helix combination design also reduces intake whistle that occurs with helix-only designs (US PAT 07055513)....Regular price $139.99 USDRegular priceUnit price per
-
Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high...Regular price $533.99 USDRegular priceUnit price per
-
This Takeda dual cat-back exhaust system for the 2015 - 2020 Subaru WRX and WRX STI delivers true bolt-on performance with gains up to +14 horsepower and +22 lbs. x ft. of torque as measured on our in-house dyno. 3" into 2-1/4" mandrel-bent 304...Regular price $2,135.99 USDRegular priceUnit price per
-
Constructed of 304 stainless steel for long lasting strength and durability. Designed for exhaust gases to travel straight through the heat resistant perforated core for a remarkable tone. Universal muffler fits 2-1/2" stainless steel tubing. See below for specifications. Configuration: 2-1/2" inlet/outlet center/offset 4"...Regular price $185.99 USDRegular priceUnit price per
-
This cat-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features high-flow 409 stainless steel mufflers that eliminate drone and resonance. This high-clearance off-road exhaust system is designed for rugged trails, helping reduce...Regular price $796.99 USDRegular priceUnit price per
-
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...Regular price $796.99 USDRegular priceUnit price per
-
Constructed with 100-percent polyurethane boxed frame, this high flow, oiled OE replacement performance filter will outflow the stock filter for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for...Regular price $91.99 USDRegular priceUnit price per
-
Dramatically increase ground clearance on your Subaru while maintaining factory ride quality with the aFe CONTROL Lift Kit. With our 2” lift you can easily fit larger off-road tire packages to take on the most rugged terrain. Engineered to maintain proper suspension geometry, we...Regular price $719.99 USDRegular priceUnit price per
-
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a...Regular price $581.99 USDRegular priceUnit price per
-
Designed to streamline the installation process of select aFe POWER intake systems, this extension harness allows for hassle-free relocation of the factory Mass Air Flow [MAF] sensor. Suitable for a wide range of projects or modifications that require the relocation of the factory MAF...Regular price $21.99 USDRegular priceUnit price per
-
Increased Power and Performance: SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that flash IN the ECM, our performance chips receive data from...Regular price $285.99 USDRegular priceUnit price per
-
This axle-back exhaust system is constructed of 3" - 2-1/2" mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4" diameter 304 stainless steel clamp-on exhaust tips. This system produces a deep sound unleashing...Regular price $871.99 USDRegular priceUnit price per
-
Constructed with 100-percent polyurethane on top and bottom, this high flow, oiled performance filter is our highest flowing media for improved horsepower and torque. Five layers of progressively finer mesh cotton gauze media provide maximum airflow for best performance results. Washable and reusable for...Regular price $85.99 USDRegular priceUnit price per
-
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel,...Regular price $660.99 USDRegular priceUnit price per
-
aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These 2.0" diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt...Regular price $179.99 USDRegular priceUnit price per
-
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel,...Regular price $674.99 USDRegular priceUnit price per
-
5" 409 Stainless Steel Construction: This DPF-back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability.7" Diameter Polished Exhaust Tip: Finishing off this exhaust system is a 7" diameter polished stainless steel clamp-on exhaust tip. The tip...Regular price $533.99 USDRegular priceUnit price per
-
Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel,...Regular price $440.99 USDRegular priceUnit price per
-
D2 Dura-Dry Filter for Hassle-free Replacement: The D2 Dura-Dry filter is designed to be disposable, simply replace the old filter with a new one and you're ready to go. Its advanced non-woven synthetic media delivers strong airflow while providing substantial protection by capturing dust...Regular price $60.99 USDRegular priceUnit price per
-
The Serrated/Helix combination design creates intake turbulence in the combustion chamber. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with Helix only...Regular price $139.99 USDRegular priceUnit price per
-
aFe Large Bore-HD 5in 409SS DPF-Back Exhaust System w/Black Tip 19-20 Ram Diesel Trucks L6-6.7L (td)
aFe Large Bore-HD 5in 409SS DPF-Back Exhaust System w/Black Tip 19-20 Ram Diesel Trucks L6-6.7L (td)5" 409 Stainless Steel Construction: This DPF-back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability.7" Diameter Black Exhaust Tip: Finishing off this exhaust system is a 7" diameter black stainless steel clamp-on exhaust tip. The tip...Regular price $568.99 USDRegular priceUnit price per -
aFe Power PROGUARD Oil Filters deliver increased flow and efficiency that are demanded in today's vehicles. These oil filters utilize a high performance synthetic media for maximum filtration with minimal flow restriction and are engineered to ISO 4548-12. 44-LF036 is a direct OE replacement...Regular price $38.99 USDRegular priceUnit price per
advanced FLOW engineering (aFe Power) is a premier designer and manufacturer of automotive performance upgrade systems and components. Current product lines include cold air intake systems, high performance direct fit and racing air filters, exhaust systems, intercoolers, turbochargers, electronic programmers, diesel fuel systems, throttle body spacers, and more. aFe is passionate about providing the most compelling, innovative, and highest performing products that are designed, built and tested in the USA. aFe was founded in 1999 and has headquarters and manufacturing facilities in Corona, California, USA.