Air Intake Systems

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 7.5” tall 360-degree radial flow air filter features a 4.0" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering...

Large Five Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/2" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing...

This filter features five layers of pre-oiled cotton gauze media to provide maximum performance. Its progressive layering allows the filter to flow at high levels even when dirty. This media is perfect for street and/or track use. Pro 5R filters are easily recharged with...

This 7" tall 360-degree radial flow air filter features a 5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air...

Unique One-Piece High Quality Housing W/ Sight Window: A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing...

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

Transform your Mustang’s performance with a sealed cold air intake that’s built to dominate. Precision-engineered to deliver cooler, denser air to your engine, this intake increases airflow while reducing heat soak — unlocking stronger throttle response, increased horsepower, and improved torque throughout the RPM...

This 7.5” tall 360-degree radial flow air filters feature a 6” x 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Their progressive layering provides great filtration efficiency and dust holding capacity, while not requiring...

A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is...

A safari snorkel system relocates your engines air intake point from the relatively low and vulnerable position under the hood to a much higher and safer location where a constant source of cool, clean, dry air is available. Manufactured from premium quality polyethylene, safari...

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and...

The all new Takeda Retain Intake System produces up to 9HP and 9lbs. x ft. of torque over stock, while outflowing the factory intake by 24%. A one-piece powder-coated heat shield is used to protect the filter from unwanted hot engine air for maximum...

With seven layers of progressively finer mesh cotton gauze/synthetic media between 100-percent polyurethane top and base, this high flow "oiled" conical performance filter provide maximum protection with highest cumulative filtration efficiency for severe duty environments. Washable and reusable for multiple cleanings, the tall open...

Magnum FORCE Cold Air Intake System Spare Parts Kit Fits aFe POWER Intakes PN: 51-10412, 54-10412, 75-10412 & 75-10412-0VThis Part Fits: Year Make Model Submodel 2003,2005-2007 Dodge Ram 2500 Laramie 2003-2004,2006-2007 Dodge Ram 2500 SLT 2006-2007 Dodge Ram 2500 Sport 2003-2004,2006-2007 Dodge Ram 2500...

Durable Clear Polycarbonate Construction:With its durable injection molded polycarbonate construction, this filter sight window is resistant to cracking and impact. Its transparent finish allows for hassle-free filter inspection, without having to disassemble the cold air intake system.

Durable Clear Polycarbonate Construction: With its durable injection molded polycarbonate construction, this filter sight window is resistant to cracking and impact. Its transparent finish allows for hassle-free filter inspection, without having to disassemble the cold air intake system.

The high temperature 1-Ply reinforced silicone reducer coupler is designed to connect to a (4.15" x 3.75")OD tube and is 2.35" long. Standard stainless steel worm-gear #056 & #064 clamps provides tight connections, durability, and is corrosion resistant for industrial, commercial, truck, off-road, and...

The high temperature injected molded reinforced silicone hump coupler is designed to connect to a 3-1/2" ID tube. The coupling is 3" long with a 30 degree bend. Standard stainless steel worm-gear #056 clamps provides tight connections, durability and is corrosion resistance for industrial,...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

aFe POWER Track Series Intake Systems, the pinnacle of innovation in open-element intakes. Showcasing a one-piece housing that shields from elements and heat, seamlessly fitting into the engine bay. The highlight of the Track Series is its carbon fiber intake tube, meticulously CAD-designed and...