Brake Hardware
-
Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and Harshness) response in vehicle platforms. Shim kits include 4 shims, enough for two calipers.Regular price $25.99 USDRegular priceUnit price per
$27.24 USDSale price $25.99 USD -
Wilwood’s Pad Shim Kits feature a steel and elastomeric construction that dampens vibration transmitted between the rotor and pad. This is an industry standard to reduce NVH (Noise, Vibration and Harshness) response in vehicle platforms. Shim kits include 4 shims, enough for two calipers.Regular price $22.99 USDRegular priceUnit price per
$24.69 USDSale price $22.99 USD -
Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.Regular price $3.99 USDRegular priceUnit price per
-
Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mounts. With a hub mount bolt circle of 5 x 5.00” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III...Regular price $88.99 USDRegular priceUnit price per
$95.21 USDSale price $88.99 USD -
Bridge Bolt Tubes for various Wilwood calipers with a .260” ID, .500” OD and various lengths for specific caliper styles and rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance or a bright polished finish.Regular price $8.99 USDRegular priceUnit price per
$9.08 USDSale price $8.99 USD -
Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .65” thick pads.Regular price $10.99 USDRegular priceUnit price per
$11.36 USDSale price $10.99 USD -
Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .65” thick pads.Regular price $10.99 USDRegular priceUnit price per
$11.36 USDSale price $10.99 USD -
Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Calipers to different rotor widths. 300-6588 will convert 0.38 and 0.81 to 1.25” wide rotor width, 300-6589 to will convert spacing to 0.81”Regular price $31.99 USDRegular priceUnit price per
$34.25 USDSale price $31.99 USD -
Caliper Bridge Spacer Kits contain bolts, bridge spacer and other hardware to convert Narrow Dynalite, Narrow Dynapro and Forged Narrow Dynalite Calipers to different rotor widths. 300-6588 will convert 0.38 and 0.81 to 1.25” wide rotor width, 300-6589 to will convert spacing to 0.81”Regular price $31.99 USDRegular priceUnit price per
$34.25 USDSale price $31.99 USD -
Replacement Holdown Cup Spring for Wilwood’s internal Parking Brake kits and Brackets. Made from alloy steel and plated for corrosion resistance.Regular price $1.99 USDRegular priceUnit price per
-
Replacement Holdown Cup for Wilwood’s internal Parking Brake kits and Brackets. Made from alloy steel and plated for corrosion resistance.Regular price $1.99 USDRegular priceUnit price per
-
Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.Regular price $3.99 USDRegular priceUnit price per
-
Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.Regular price $3.99 USDRegular priceUnit price per
-
Individual spacers for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer are made from high strength aluminum alloy. Spacers widths will vary in application based on caliper. Please see accompanying drawing for offset applications.Regular price $0.99 USDRegular priceUnit price per
-
Slide Pin Bolt Sleeve for many Wilwood Floating calipers. Fits D52 / D154 /DH /HM and HC calipers. Made from high strength steel alloy and plated for corrosion resistanceRegular price $1.99 USDRegular priceUnit price per
-
Bridge Bolt Tubes for various Wilwood calipers with a .260” ID, .500” OD and various lengths for specific caliper styles and rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance or a bright polished finish.Regular price $10.99 USDRegular priceUnit price per
$11.36 USDSale price $10.99 USD -
Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.Regular price $10.99 USDRegular priceUnit price per
$11.36 USDSale price $10.99 USD -
Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.Regular price $10.99 USDRegular priceUnit price per
$11.36 USDSale price $10.99 USD -
Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Narrow Dynalite 4 Piston and Dynapro calipers using a .63” to...Regular price $6.99 USDRegular priceUnit price per
-
Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4 Piston and Dynalite / Dynapro Single caliper using a...Regular price $6.99 USDRegular priceUnit price per
-
Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.Regular price $5.99 USDRegular priceUnit price per
$6.03 USDSale price $5.99 USD -
Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.Regular price $8.99 USDRegular priceUnit price per
$9.44 USDSale price $8.99 USD -
Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.Regular price $5.99 USDRegular priceUnit price per
-
Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.Regular price $6.99 USDRegular priceUnit price per
$7.55 USDSale price $6.99 USD
