Catback

Even the latest-model sport compact vehicles have room for improvement and is why aFe POWER Takeda stainless steel cat-back exhaust system for the Honda Civic Type R L4-2.0L (t) engine is here to turn it up. In-house testing shows this Takeda exhaust system delivered...

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. The mufflers has a polished finish for ultimate...

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0723 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully...

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0209 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully...

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0316 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are...

Takeda Cat-Back Exhaust Systems are engineered to increase exhaust flow, improve performance, and deliver an aggressive exhaust tone with premium styling. The Takeda 3-1/2-inch Cat-Back Exhaust System features full 3-1/2-inch mandrel-bent 304 stainless steel tubing for maximum airflow, strength, and corrosion resistance. Designed to...

Gibson Single Side Exhaust is perfect for improved acceleration, maximum hill climbing, towing and passing power. This is our best performing Exhaust System. Exits behind the rear tire. Quieter in the cab than any other Performance Exhaust. Dyno test results show it makes maximum...

This cat-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 4 IN diameter polished stainless...

This cat-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a 4 IN diameter black stainless...

This cat-back exhaust system is constructed of 3 IN mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features high-flow 409 stainless steel mufflers that eliminate drone and resonance. This high-clearance off-road exhaust system is designed for rugged trails, helping reduce...

aFe is proud to announce the MACH Force-Xp cat-back exhaust system for the 2012-2117 Jeep Grand Cherokee SRT/SRT8 with the V8-6.4L HEMI engine. This exhaust system is constructed out of mandrel-bent 304 stainless steel tubing for unrestricted flow and is MIG-welded for strength and...

This Takeda dual cat-back exhaust system for the 2015 - 2020 Subaru WRX and WRX STI delivers true bolt-on performance with gains up to +14 horsepower and +22 lbs. x ft. of torque as measured on our in-house dyno. 3" into 2-1/4" mandrel-bent 304...

The MagnaFlow Toyota Sequoia Overland Series Cat-Back Performance Exhaust System #19625 offers the improved off-road capabilities, higher ground clearance, dyno-proven performance and signature MagnaFlow sound necessary to turn your 2023-2024 Toyota Sequoia into the ultimate overlanding vehicle. #19625's direct-fit design is easy to install...

The MagnaFlow 2024-2025 Ford Ranger SPEQ Series Cat-Back Performance Exhaust System 19635 brings out the personality of your truck with our signature resonant, powerful engine tone and dyno-proven performance. MagnaFlow #19635 3" diameter mandrel bent main piping passes through an all-new specifically tuned performance...

The MagnaFlow 2011-2014 Ford F-150 Street Series Cat-Back Performance Exhaust System 15364 brings out the personality of your 3.5L 2011-2014 Ford F-150 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through...

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0824 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully...

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0787 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully...

Banks Power introduces the new 5 in. Monster Exhaust designed specifically for the 2017-2022 Ford 6.7L F-250/350/450 Super Duty pickup trucks. The DPF-back exhaust system features constant-diameter 5 in. mandrel-bent aluminized steel tubing and a massive patented tip which virtually eliminates backpressure after the...

This system fits all V6/V8 engines and produces an astonishing 9 HP and 15lbs. x ft. torque at the wheels. The cat-back design is constructed using 3 mandrel-bent 409 stainless steel, free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for...

aFe power introduces the Hi-Tuck "Rock Basher" (RB) Scorpion cat-back exhaust system for 2007-2018 Jeep Wrangler (JK) 2 and 4 door models. Constructed of 2-1/2" mandrel-bent aluminized steel tubing, the smooth curves and increased diameter of this exhaust system helps remove restriction and keeps...

This MACH Force-Xp exhaust system is constructed of mandrel-bent stainless steel tubing for maximum strength and durability. Featuring a high-flow stainless steel muffler that produces a deepened tone, this system is guaranteed to gain attention. The state-of-the-art computer-aided technology utilized to design this system...

This system is constructed of 2-1/2 IN 304 stainless steel tubing for maximum strength and durability. Includes dual high flow catalytic converters which are less restrictive than the factory converters providing maximum flow. Factory style laser cut flanges are used used for a secure...