DV8 Offroad

Our Wire Harness comes equipped with a Deutsch Power (DTP) connector that is compatible with DV8’s 20-Inch Elite Series LED Dual Row Light Bar. The harness features a 15-foot 12 AWG wire, 9-foot plug, metal switch, 60 AMP relay, and 3/4-inch round metal black...

With an 8 ton working load limit, our Elite Series D-Ring Shackles were designed to handle the toughest of recovery situations. The -Inch chromoly pin fits industry standard D-ring mounts and sits flush with the outside of the shackle for a clean aesthetic. The...

Our Universal Tool Mounts are designed to attach virtually anywhere with a hole or slot for storing recovery gear, tool bags, flashlights, air inflator/deflator equipment, cords, and so much more. Additionally, you can use them in pairs for securing longer tools such as axes,...

Strong 3mm steel molle panels with 1.5" x 1" cut-outs and extra 1/4" mounting holes for versatile gear storage. Includes spacers for offset mounting. Great for tools, recovery gear, and accessories in vehicles, garages, or workspaces. Micro-texture black powder coat finish. Drilling required. Available...

Strong 3mm steel molle panels with 1.5" x 1" cut-outs and extra 1/4" mounting holes for versatile gear storage. Includes spacers for offset mounting. Great for tools, recovery gear, and accessories in vehicles, garages, or workspaces. Micro-texture black powder coat finish. Drilling required. Available...

Strong 3mm steel molle panels with 1.5" x 1" cut-outs and extra 1/4" mounting holes for versatile gear storage. Includes spacers for offset mounting. Great for tools, recovery gear, and accessories in vehicles, garages, or workspaces. Micro-texture black powder coat finish. Drilling required. Available...

Strong 3mm steel molle panels with 1.5" x 1" cut-outs and extra 1/4" mounting holes for versatile gear storage. Includes spacers for offset mounting. Great for tools, recovery gear, and accessories in vehicles, garages, or workspaces. Micro-texture black powder coat finish. Drilling required. Available...

Strong 3mm steel molle panels with 1.5" x 1" cut-outs and extra 1/4" mounting holes for versatile gear storage. Includes spacers for offset mounting. Great for tools, recovery gear, and accessories in vehicles, garages, or workspaces. Micro-texture black powder coat finish. Drilling required. Available...

Our Quick Release Tool Mounts offer unlimited solutions for storing tools and equipment on your interior or exterior molle panels. They can be used individually for securing flashlights, recovery gear, tool bags, air inflator/deflator equipment, and other gear; or you can pair them up...

Our versatile universal spare tire carrier is the perfect storage solution for spare tires, bikes, motorcycles, and other gear. Our mount is adjustable with a minimum inside width of 7-inches and a maximum inside width of 14-inches to fit a wide range of tires;...

The rubber plugs replace the spare tire isolators and wiring grommet. A LED license plate is included with the delete. The micro-texture powder coat finish and steel construction protect the back of your vehicle. Our tire delete is fully bolt-on with no cutting or...

* Please Note: The tire carrier can fit up to a 20-inch wheel and a 38” x 13.5” tire. We recommend using the carrier with wheels that have a 4+ inch backspacing, as it is not compatible with -44 offset wheels. The carrier is...

Our MTO Series Spare Tire Swing Gate was designed to support larger & heavier aftermarket wheels & tires. This add-on tire carrier is compatible with our MTO Series Steel Rear Bumper. The swing gate opens with the tailgate, and transfers the extra tire/wheel weight...

The DV8 Jeep Wrangler JL Tailgate Reinforcement Molle Panel reduces strain on the factory hinges by distributing weight across the entire tailgate and adds secure molle mounting for gear. It maintains factory tire and wheel fitment, provides added confidence when running 35" tires, and...

The DV8 Offroad Tailgate Reinforcement Molle Panel strengthens the Jeep Wrangler JK tailgate by spreading spare-tire weight across the door, reducing stress on factory hinges. It supports running 35" tires while keeping factory tire and wheel fitment unchanged. The integrated molle grid provides mounting...

Our Tire Carrier can store your spare in a flat or angled position. The stainless single action locking mechanism and gas shocks allow the carrier to move easily between the two positions. There is an integrated 3/8-inch hole on one of the carrier’s posts...

The DV8 Offroad Tailgate Reinforcement Molle Panel for the Ford Bronco strengthens the factory rear door while adding versatile gear mounting capability. Designed to help distribute weight evenly across the tailgate, it provides added support when running larger spare tires, including 35” setups.This Part...

DV8s Tire Carrier assumes the weight of the spare tire and reinforces the tailgate. It retains the factory tailgates capacity to open-up greater than 150. Included with the carrier is an antenna/whip flag mount, self-lubricating brass bushings, and a third brake light extension. It...

When running your rig without the doors, its nice to kick your foot out in a comfortable position. Our Foot Pegs give you a relaxing spot to rest your foot and enjoy the open air experience. Sold as a pair, these foot rests easily...

Our Rock Sliders protect your truck’s side panels, and their low-profile design retains the factory side clearance. The sliders are made from 4mm tube and plate steel, and they are finished in a micro-texture black powder coat. The sliders feature a fully bolt-on install...

Our Side Steps mount to your body/pinch weld, and they feature a textured design for added grip. The steps also offer protection from light trail debris. They do not cause a loss of clearance. They are made from 3mm/4mm steel, and are finished in...

Our Side Steps feature an anti-slip design, and they mount directly to the frame. The step’s are designed to retain the factory side clearance and provide protection from light trail debris. They are made from steel, and are finished in a micro-texture black powder...

Our Side Steps feature an anti-slip design, and they retain the factory side clearance. The steps provide protection from light debris, and they fully bolt-on to the body/pinch weld. Our steps are made from steel, and they are finished in a micro-texture black powder...