Exhaust, Mufflers & Tips

Because Jeep enthusiasts need power from idle to 3000 RPM, Gibson designed their jeep exhaust to enhance low and mid range power for climbing and towing This dual exhaust exits straight out the back for a look that sets your jeep apart on the...

Because Jeep enthusiast need more power from idle to 3,000 RPM, Gibson Designed their Jeep Exhaust to enhance low and mid range performance for climbing and towing. This Hi Temp Black Ceramic Coated Dual Extreme Rear Exhaust exits behind each rear tire to provide...

Because Jeep enthusiast need more power from idle to 3,000 RPM, Gibson Designed their Jeep Exhaust to enhance low and mid range performance for climbing and towing. This Hi Temp Black Ceramic Coated Dual Extreme Rear Exhaust exits behind each rear tire to provide...

Because Jeep enthusiast need more power from idle to 3,000 RPM, Gibson Designed their Jeep Exhaust to enhance low and mid range performance for climbing and towing. This Split Rear Exhaust exits straight out the back, with Dual Large diameter Stainless Tip. Hassle free,...

Gibson Single Side Exhaust is perfect for improved acceleration, maximum hill climbing, towing and passing power. This is our best performing Exhaust System. Exits behind the rear tire. Quieter in the cab than any other Performance Exhaust. Dyno test results show it makes maximum...

This 2.5" diameter optional mid section is designed to work ONLY with BORLA® Axle-Back systems 11981 & 11981BC. Installation REQUIRES cutting the mid section of the stock exhaust behind the catalytic converters and welding the inlet pipes in 60738 to rear of catalytic converters....

This 2.5" diameter optional mid section is designed to work ONLY with BORLA® Axle-Back systems 11981 & 11981BC. Installation REQUIRES cutting the mid section of the stock exhaust behind the catalytic converters and welding the inlet pipes in 60738 to rear of catalytic converters....

Borla(r) system is a True Dual design. This 3" diameter Mid-Section includes Active Exhaust Valves. The ATAK(r) sound level delivers an aggressive, race-bred sound without any drone. It features our Polyphonic Harmonizer and SwitchFire(r) technology. Borla(r)'s Polyphonic Harmonizer Technology utilizes patented units that contain...

BORLA(r) system is a True Dual design. This 3" diameter mid-section / Muffler assembly includes Active Exhaust Valves. The S-Type sound level delivers an aggressive, yet balanced sound with a deep tone without any drone. It features our SwitchFire(r) technology that completely eliminates the...

NOT Compatible with the 3.5L PowerBoost. Fits Models With Bumper Cutouts (Notches). For models WITHOUT bumper cutouts, use one of our standard Cat-Back systems like 140867. This Mid-Section / Muffler Assembly features 3" diameter pipes and the aggressive ATAK® sound with no drone inside...

NOT Compatible with the 3.5L PowerBoost. Fits Models With Bumper Cutouts (Notches). For models WITHOUT bumper cutouts, use one of our standard Cat-Back systems like 140866. This Mid-Section / Muffler Assembly features 3" diameter pipes and the classic S-Type sound with no drone inside...

Upgrade your 300C (2023) or Charger ('15-'23) with these 5" round carbon fiber with black anodized center tips. Bright chrome on T-304 stainless steel tips, and black chrome on t-304 stainless steel tips are also available. he tips are designed to work with the...

Upgrade your 300C (2023) or Charger ('15-'23) with these 5" round black chrome on T-304 stainless steel tips. Using BORLA® Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber...

Upgrade your 300C (2023) or Charger ('15-'23) with these 5" round bright chrome on T-304 stainless steel tips. Black chrome on T-304 stainless steel tips, and carbon fiber tips are also available. The tips are designed to work with the Original Equipment (O.E.) system,...

BORLA® system is a True Dual design. This 3" BORLA® mid-section / muffler assembly was designed specifically for the F-150 Raptor. It features the aggressive ATAK® sound and provides a more exciting driving experience without any drone. The system contains BORLA®'S unique Polyphonic Harmonizer...

These 3" diameter Tail Pipes feature single 4.5" round carbon fiber tips with black anodized centers on each tail pipe. They will fit with either BORLA® 60728, 60736, or 60737 mid-sections / muffler assemblies, or the Original Equipment (O.E.) mid-section / muffler assembly. Tail...

These 3" diameter Tail Pipes feature single 4.5" round black chrome on T-304 stainless steel tips on each tail pipe. They will fit with either BORLA® 60728, 60736, or 60737 mid-sections / muffler assemblies, or the Original Equipment (O.E.) mid-section/ muffler assembly. Includes heatshields...

Adapter Kit allows Borla(r) Cat-Back(tm) systems 140837, 140837BC, and 140837CF to be used on 202+1-2023 Mustang Mach 1 vehicles. Adapter Kit includes 2) 2.25" I.D. inlet x 2.75" I.D. outlet x 5" long adapters and 4) clamps. Each Adapter Kit is built from premium,...

Upgrade your TRX or RHO with these unique 5" round angle-cut Brawler style high temperature black coated T-304 stainless steel tips. The BORLA® logo is laser cut in the side wall of the tip. Bright chrome on T-304 stainless steel tips, and black chrome...

Upgrade your TRX or RHO with these 5" round angle-cut black chrome on T-304 stainless steel tips. Using BORLA® Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth....

Installation REQUIRES cutting the driver side Original Equipment (O.E.) tail pipe assembly. This 3" diameter BORLA® mid-section is a True Dual design and was tuned specifically for the Ram TRX. It features the aggressive ATAK® sound and provides a more exciting driving experience without...

Designed to work with BORLA® Cat-Back™ Systems ONLY. This BORLA® SwitchFire® X-Pipe is designed to replace the Merge X-Pipe in BORLA® Cat-Back™ systems 140742, 140743, 140745, and 140746 and the Black Chrome and Carbon Fiber tip versions of them. Contains 2) 2.25" I.D. Inlet...

Transverse 'T' Flow design. Single 2.5" inlet on side of muffler body with dual 2.5" offset outlets, one on each end of the muffler body. The internal flow of this muffler is a 'T' pattern. Reversible design for installation flexibility. High-quality T-304 austenitic stainless...