Lighting

RIGIDs A-Series LED Accessory Light is a universal light that can be used just about anywhere. Vehicle cabs, boat cabins, work vehicle beds, under the hood of a vehicle and trunks are just a few of the places where the A-Series can provide handy...

The DV8 Elite Series of LED Pod Lights are a perfect addition to your primary lighting when exploring in the dark. Amber lenses do not reflect against dust as much as clear lenses, offering improved visibility on dark & dusty trails. These new cube...

Baja Designs LP6 LP9 Upfitter Lock Out Harness

This RIGID 3 amp flasher module provides seven flashing options for your LED lighting components. It is easy to install and works off of the auxiliary switch to your lights. This model features the following modes: Single Simultaneous: Both sides flash once simultaneously, followed...

Baja Designs LP9 Pro Wiring Harness (2 Light Max)

FEATURES-20W 2in. C2 LED Area Flood Light-Durable Diecast 6063 Aluminum Housing-UV Resistant Black Powder Coated Housing-Dual Oversized Heat Sink Design for Cooler; Brighter and Longer Lasting LED Performance-Gore Military Grade Breather Membrane to prevent condensation and entry of dust/contaminants-Optically Clear and Shatter Proof Lexan...

Includes our BOLT (Bottle Opening Light Tool) to easily remove light covers or open some cold beverages.

b>FEATURES-20W 2" C2 LED Area Light-Durable Diecast 6063 Aluminum Housing-UV Resistant Black Powder Coated Housing-Dual Oversized Heat Sink Design for Cooler, Brighter and Longer Lasting LED Performance-Gore Military Grade Breather Membrane to prevent condensation and entry of dust/contaminants-Optically Clear and Shatter Proof Lexan Lens-Ideal...

Fits 2007-2018 Jeep Wrangler JK and Jeep Wrangler Unlimited JKU, Black textured powder coat, designed for a 52" overall width light bar, includes pedestal mounts for 3x3 cube lights at the bottom of the windshield, Made from steel. Light bar sold separately..This Part Fits:...

Baja Designs Jeep JK RTL-M Spare Tire Mount Kit

FEATURES-2 x A-Pillar Light Mounts for 2018-19 Jeep Wrangler JL-Black Powder Coated Steel Construction-Specifically Engineered for OE Jeep JL A-Pillar/Cowl Mounting Locations-Easy Install; No Drilling or Modification Required-Mount a variety of Auxiliary lights up to 6in. in sizePARTS INCLUDED-(2) 2018-2019 Jeep Wrangler JL A-Pillar/Windshield...

Specifically engineered for the 24-25 Rangers, these A-pillar mounts make it easy to expand your off-road visibility with ditch lights. Each bracket is constructed from high-strength steel with a durable black powder-coat finish for lasting performance and a clean, factory-fit look. Designed for easy,...

Designed specifically for the Jeep Wrangler JK, JL, and JT models. These high-quality mounts are the perfect solution to enhance your factory fog lights with improved controllable lighting. With the NACHO Quatro Fog Brackets, installation is a breeze. Utilizing the existing factory mounting hardware...

Attention all Ford Bronco owners! Are you ready to take your offroad adventures to the next level? Introducing the Gen 6 Ford Bronco Quatro Fog Brackets—a groundbreaking solution that elevates your lighting capabilities and enhances the rugged beauty of your Bronco. Upgrade your factory...

The Quatro Fog mounts are designed to integrate within the ARB Summit Bumper fog mounts.  No cutting or drilling needed. Brighten up the Summit with a set of NACHO Quatro's SAE lights.  The design is engineered to fit and is a powder coated steel bracket....

Features Bolt-on fitment on 2022+ Toyota Tundra. Allows you to mount two Stage Series LED Pods above the hood. Utilizes existing mounting points for easy installation. Thick-gauge stainless steel construction. Low-profile design. Assembled in USA. Overview Perfect fitment. The Stage Series Backlit Ditch Light...

Features Powers 5-8 Pod SS5 CrossLink Pro Lightbars. Connects directly to the battery to power your LED pods. High capacity 10AWG wiring. Single Deutsch DT-P output connector. 60A waterproof fuse, and 80A 12V relay to safeguard the electrical systems in your pods. Overview Stage...

RIGIDs Adapt Low Profile Mounting Kit offers a low profile, stealth mounting solution for the Adapt LED light bar. The low profile mounting kit includes 2 base mounts and mounting hardware. Own The Night with RIGID.

Compliment your RIGID Jeep Wrangler JL Cowl mount with the short standoff mounting option. This allows 2 sets of lights to be mounted to the 41656 Cowl Mount. These mounts are made from laser cut stainless steel and have been powder coated allowing for...

All of RIGIDs grilles, OE Brackets, and Mounts are made with stainless steel and covered with UV and abrasion resistant powder coat to ensure years of use in the harshest conditions. This 2007-2017 Jeep JK A-Pillar Mount Kit fits RIGIDs D-Series, D-XL, Radiance Pod...

The Jeep JL/JT Cyclone LED Engine Tray Kit is an essential upgrade for enthusiasts looking to enhance their vehicle's under-hood organization and accessibility. Made from durable 14GA stainless steel and designed to perfectly fit Jeep JL and JT models, this tray simplifies the installation...

Fits 2018 to Current JL Wrangler, Rubicon and Unlimited. Black textured powder coat. Designed to mount over OEM Tail Lights. Made from steel and aluminum. Not compatible with the stock LED package. Protect the plastic and glass of your JL tail lights with this...

RIGIDs A-Series LED Accessory Light is a universal light that can be used just about anywhere. Vehicle cabs, boat cabins, work vehicle beds, under the hood of a vehicle and trunks are just a few of the places where the A-Series can provide handy...