Lights

Upgrade your 2007-2018 JK Wrangler lighting with Fishbone Offroad Windshield Light Bracket. Durable black textured 11-gauge steel, ideal for extra lights, enhancing off-road visibility.This Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2017 Jeep Wrangler Rubicon...

Fits 2007-2018 Jeep Wrangler JK and Jeep Wrangler Unlimited JKU, Black textured powder coat, designed for a 52" overall width light bar, includes pedestal mounts for 3x3 cube lights at the bottom of the windshield, Made from steel. Light bar sold separately..This Part Fits:...

This 40 AMP DTP 4-Pin Halo Light Harness is designed to power a single DV8 halo-equipped light with a clean, reliable wiring solution. Built with durable 14-gauge wire, it features a 40-amp fuse and 40-amp relay to ensure consistent performance and protection. The dual...

The harness utilizes a 40-amp fuse paired with a 40-amp relay to help protect your electrical system while ensuring stable power delivery. A 10-foot wire lead with a 4-pin male Deutsch connector provides a secure connection, while the 8-foot lead routes cleanly to the...

This 40 Amp Wire Harness is built for reliable power delivery to a single light. Constructed with durable 14-gauge wiring, it features a 40-amp fuse and a 60-amp relay for consistent performance. The 10-foot lead includes a 2-pin male Deutsch connector plug, while the...

DV8 Offroad LED Tail Lights are just the thing to set your Jeep apart from all of the others and are great to replace lights that have been damaged out on the trail. Features: Octagon LED Tail Lights Easy, direct fit install Plug and...

Our Rear Speaker & Light Bar mount features a 2-inch diameter tube that is perfect for mounting speaker cans with roll bar clamps. The bar also features a mounting point for up to a 20-inch single row light bar for rear facing lighting. There...

Our Light Mount installs to our Tacoma Roof Rack, and it provides ten mounting slots for running various lighting configurations. Our mount is made from aluminum, and is finished in a micro-texture black powder coat. The light mount features a low-profile design.* Please Note:...

The Land Cruiser 250 Series and Lexus GX 550 Light Mount is a bolt-on roof rack accessory that supports various front-facing lighting setups, including two 20-inch single row light bars, one 40-inch light bar, or ten 3-inch pod lights. Made from lightweight, durable aluminum...

The 2025–2026 Toyota 4Runner Roof Rack Light Cutout Fairing fits the DV8 Roof Rack (RRTF3-02) only. It features a low-profile cutout design to reduce wind noise and allow flexible lighting options. Mount a 40” light bar, (2) 20” single-row bars, or up to (10)...

Our Light Mount allows you to secure the Baja Designs XL Linkable Light Bar to the DV8 Spec Series Roof Racks with Light Option. The light mount is made from 5mm steel that is finished in a micro-texture black powder coat. Our light mount...

DV8 LED Fog Lights provide an alternative to factory fog lights and compliment LED headlights. These lights come complete with a housing that is the same as the factory housing and a connector that is ready to be spliced into the factory wiring. If...

These ditch brackets let you mount up to two 3-inch light pods per side, or use the extra spot for an antenna or whip light, while keeping a clean, low-profile look. The slotted design allows easy adjustment, and the durable black powder coat stands...

These ditch light brackets come as a driver and passenger side pair, with each able to mount two 3-inch light pods or an accessory like an antenna or whip light. The slotted mounts let you adjust placement, while the low-profile design blends with the...

Our Dual Light Pod Mounts install to the base of the A-pillars, and enable you to mount (2) 3-inch light pods on each side. These can be used for multiple lighting configurations. Each of the 2 light mount positions can be pointed forward or...

Pair these A-Pillar Dual Light Pod Mounts with our LBJL-10 Light Bar Mount (required) to attach (2) 3-inch light pods on each side of your hood cowl. This setup maximizes trail lighting without obstructing your view thanks to its sleek, low-profile design. Customize your...

Our low-profile light bar mount lets you attach a 50-inch LED light bar just above your rig's windshield. It's designed to be low-profile to reduce wind noise, but won't block your view. The mount fits most 50-inch light bars and has a hidden channel...

These pod light brackets install directly to factory mounting locations on the cowl/a-pillar of your Jeep Mojave or 392. Up to two 3-inch LED pod lights can be installed on each side, providing ample lighting on the trail in low-light conditions. The brackets are...

These light mount brackets install direct to factory mounting locations on the cowl of your Jeep maintaining a low-profile position. Up to two 3-inch LED pod lights can be installed on each side, providing additional lighting on the trail in low-light conditions. The brackets...

These dual pod light mounts bolt directly to factory mounting points, giving you a clean, low-profile way to add auxiliary lighting up front. Each bracket holds up to two 3-inch LED pod lights, or one light and a second accessory like an antenna or...

Our A-Pillar Dual Light Pod Drop Mounts provides options to mount (2) 3-inch light pods on each side of the vehicle. The top light mounting point is perfect for forward-facing or angled lighting. The drop mounting point is great for either forward-facing or side...

DV8 Offroad has designed a tubular bull bar for the Bronco's factory steel bumper that sits much lower in front of the grille than the OEM version, giving it a low profile appearance. The tube features 2 adjustable light mounts that allow for LED...

These light brackets were designed to enable you to cleanly mount dual, 3-inch pod lights in each of the fog pockets on the factory Bronco steel front bumper. They can be used for additional trail lighting or as fog lighting. The pod light brackets...