Popular Vehicles

This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-5/8 IN mandrel-bent stainless steel tubing for maximum strength and durability. This coating combination reduces the outside surface...

This system is constructed of 1-5/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Includes a single high flow catalytic converter which is less restrictive than the factory converter providing maximum flow. Factory style laser cut machined flanges are used used...

The aFe Mach Force XP Loop Delete/Y-Pipe combo package is engineered to replace the stock loop section and y-pipe to accommodate long arm travel lift kits that interfere with the OE loop and Y-Pipe. This product is constructed of mandrel bent, 2"/2.5" 409 stainless...

The aFe Mach Force XP Jeep "Y-pipe" is designed to connect the stock converter with either the stock exhaust or aFes Mach FORCE XP exhaust system. Designed also to accommodate aftermarket lift kits, this y-pipe features 2 x 2" into 1 x 2 1/2"...

Replace the faulty or old stock catalytic converter with the all new aFe power direct-fit cat replacement. This cat replacement is constructed of mandrel-bent, 100% MIG welded stainless steel for strength and durability. This unit comes with a 49-State federal approved cat and 3/8"...

This system is constructed of 2-1/2" - 3" mandrel-bent 409 stainless steel tubing for maximum strength and durability. This kit comes with a EPA compliant catalytic converters for a bolt-on and go installation. A mitered merge collector is used to decrease turbulence and increase...

aFe Powers new rear-end differential cover brings performance engineering to the protection of your trucks rear-end. This differential cover has a 4 quart lube capacity at the factory fluid level line, a magnetic drain plug and a magnetic fill plug to remove unwanted debris....

The actuator requires no special timing of the turbocharger during installation, and comes with a plug and play calibration tool for VG calibration. This turbocharger actuator can be installed on 07.5-12 models with the included wire harness adapter. For 13-18 models, the harness adapter...

The compressor features an anodized 7+7 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbocharger. This turbocharger setup can be installed on 03-07 Ford F250/F350/F450/F550 Super...

Specifications: Compressor Inducer - 59.9 mm, Compressor Exducer - 85.0 mm / Trim: 49.0, Turbine Inducer - 69.8 mm, Turbine Exducer - 76.2 / Trim: 83.9 mm, Turbine Housing: 1.15Billet Wheel: The compressor features a gold anodized 9 bladed billet aluminum wheel that is...

These manifolds have both the inlet, and the outlet ports machined to match the factory gaskets. This allows for maximum flow, without compromising gasket performance. These manifolds have 25% Thicker walls than the warp-prone factory manifolds. The increase in thickness increases the rigidity of...

This aFe POWER 85mm Throttle Body improves engine air flow over the stock 80mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be ore noticeable as more upgrades are added to the vehicle. This aFe POWER 85mm...

The serrated/helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber, resulting in increased performance and improved throttle response. The serrated/helix combination design also reduces intake whistle that occurs with helix-only designs (US PAT 07055513)....

These couplings are constructed from high temperature 5-Ply polyester reinforced silicone material. These hoses allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your pipes or other equipment break.This Part Fits: Year...

BladeRunner 3-1/2 IN to 3 IN Aluminum Cold Charge Pipe Black Ford F-150 18-19 V6-3.0L (td)This Part Fits: Year Make Model Submodel 2018-2020 Ford F-150 King Ranch 2018-2020 Ford F-150 Lariat 2018-2020 Ford F-150 Platinum 2018-2020 Ford F-150 XL 2018-2020 Ford F-150 XLT

aFe Power's intercooler tubes are constructed from 2-1/2" (Hot Side) and 3" (Cold Side) mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The...

BladeRunner GT Series intercooler end tanks are constructed out of heavy-duty 3/16" TIG-welded aluminum plates. This BladeRunner GT Series Intercooler features a 4-1/2" bar and plate core that is extremely durable and allows for greater airflow over stock.This BladeRunner Intercooler features billet aluminum inlet...

The BladeRunner intake heater relocation allows you to relocate the intake heater from the failure-prone factory location to in front of the intake manifold. This places the intake heater upstream of the EGR feed, avoiding EGR contamination of the intake heater. The factory grid...

Add dedicated front recovery points to your Toyota Tundra. aFe POWER Tow Loops mount directly to the frame and are much safer than the factory tie-down loop when towing or recovering a stuck vehicle. The 3/4 IN solid steel loop is designed to safely...

aFe CONTROL fabricated suspension strut braces will stiffen up your chassis and give your engine bay a unique look. Made from 304 stainless steel, the I-beam design is TIG welded to form a lightweight brace that increases the front end rigidity and improving turn-in...

Dramatically reduce body roll without sacrificing ride quality with aFe CONTROL’s Explorer ST sway bars. Our 3-way adjustable front & rear sway bars will allow you to easily dial in the handling balance of your ST. Sharpened steering response will improve initial turn-in making...

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding...

Constructed with 100-percent polyurethane boxed frame, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding...