Steering Knuckles & Spindles

RockJocks 1 1/4 in. solid alloy steel tie rod bar only out of their Currectlync heavy duty steering system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive 22mm RH/LH threads and giant clamps. This piece is rated at 200% stronger than...

RockJocks left hand thread forged alloy steel tie rod end for their CE-9701 Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot,...

RockJocks 1 1/4 in. solid alloy steel tie rod only out of their Currectlync heavy duty steering system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles includes the tie rod bar, the two 22mm thread tie rod ends and giant clamps. This piece...

RockJocks forged alloy steel drag link end only from their Currectlync heavy duty drag link for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive 1 1/8 in. threads. This piece is used at the pitman arm end of the drag link and...

RockJocks 1 1/4 in. forged alloy steel drag link end only from their Currectlync heavy duty drag link for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive 1 1/8 in. threads as well as a substantially oversized junction point where the tie...

RockJocks 1 1/4 in. forged alloy steel drag link only out of their Currectlync heavy duty steering system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive threaded rod ends, an oversized 1 1/8 in. threaded adjuster and giant clamps. This piece...

Tie rod end boots wear out, its inevitable. Drying, cracking, tearing can let grease escape and shorten the life of your tie rod ends. This is the direct replacement boot for all of the RockJock Currectlync steerings tie rod ends. All you have to...

RockJocks Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles has been a staple in the off-road hobby for over 2 decades! Features include a 1 1/4 in. diameter forged alloy drag link, and 1...

For the Jeep enthusiast who wants improved steering control, the heavy duty Rancho RS5000 works on and off the road by absorbing shock loads transmitted from the front wheels to the steering system. The steering stabilizer is engineered for vehicles with oversized tires and...

79-'85 Hilux and '75-'90 Landcruiser Knuckle kit (2 sides) with bearings, seals, and Wipers. This kit includes high quality Nachi bearings.This Part Fits: Year Make Model Submodel 1984-1986 Toyota 4Runner DLX 1984-1986 Toyota 4Runner SR5 1975-1990 Toyota Land Cruiser Base 1979-1986 Toyota Pickup Base...

Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, and other general maintenance items. For all your differential small parts needs, look no...

Our 3/5 drop kit is a great way to lower your vehicle without sacrificing ride quality. This kit comes with our 2 inch drop spindles which help retain the factory ride. We then pair the spindles with a 1 inch vehicle specific lowering coil...

The Maxtrac Suspension 6-inch lift for the Toyota Tundra is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the...

Upgrade your 2021-2026 Ford F-150 4WD to a Tremor “conversion” with the F-150 Front Knuckle Kit from ICON Vehicle Dynamics. The steering knuckle’s design replicates the suspension geometry of the Ford F-150 Tremor and when paired with ICON F-150 Tremor coilover kits the combination...

The Maxtrac Suspension 6.5-inch lift for the Nissan Titan is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the...

The Maxtrac Suspension 4.5-inch lift for the Nissan Titan is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the...

The Maxtrac Suspension 4.5-inch lift for the Nissan Titan is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the...

The Maxtrac Suspension 7-inch lift for the Ford F150 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the...

4in. lift spindles made from ductile iron and e-coated. Comes with DOT approved brake lines and all necessary hardware. Recommended wheel size is 17in. or larger with 4 3/4 back spacing. Recommended tire size is 33x12.50. Will not fit stock wheels and tires.This Part...

4in. lift spindles made from ductile iron and e-coated. Comes with DOT approved brake lines and all necessary hardware. Recommended wheel size is 17in. or larger with 5in. back spacing. Recommended tire size is 33x12.50. Will fit stock wheels and tires.This Part Fits: Year...

MAX TRAC SUSPENSION'S PART# 701550 IS A PAIR OF 5" LIFT SPINDLES W/ EXTENDED BRAKE LINES MADE FROM DUCTILE STEEEL & E-COATED BLACKThis Part Fits: Year Make Model Submodel 2015-2020 Cadillac Escalade Base 2015-2020 Cadillac Escalade Luxury 2015-2020 Cadillac Escalade Platinum 2015-2016 Cadillac Escalade...

3in. lift spindles made from ductile iron. Comes with DOT approved brake lines and all necessary hardware. Recommended wheel diameter is 15in. or larger with 3.3/4 back spacing. Recommended tire size is 30x9.5. Stock wheel and tire will not fit.This Part Fits: Year Make...

Front Lowering Spindles; 2.5 in. Drop; Made From Ductile iron; Incl. All Necessary Hardware; Fits Trucks w/1 in. Rotors Only;This Part Fits: Year Make Model Submodel 1978-1980 Chevrolet C10 Big Ten 1975-1981 Chevrolet C10 Cheyenne 1981-1986 Chevrolet C10 Custom 1975-1980 Chevrolet C10 Custom Deluxe...