Suspension

RockJocks extended rear bumpstops for the JK Wrangler and Unlimited vehicles is designed for use with and is included in all of our JK 4 1/2 in. lift off road suspension systems. Kit includes billet aluminum bump stop spacers that are 3 1/2 in....

RockJocks Johnny Joint front upper control arms for JK Wrangler and JK Wrangler Unlimited vehicles provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift. Additionally the adjustable feature of our arms allows your vehicle to be upgraded...

RockJocks Geometry Correction Axle Bracket Kit for the front Trac Bar of JK Wrangler and Unlimited vehicles relocates the axle housing mounting point of the front trac bar upward, correcting the location of the trac bar mounting point on lifted vehicles, as well as...

RockJocks high end, billet aluminum Johnny Joint front lower control arms for JK Wrangler and JK Wrangler Unlimited vehicles are a beautiful addition to any JK build and provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift!...

RockJocks Johnny Joint front lower control arms for JK Wrangler and JK Wrangler Unlimited vehicles provide length adjustability allowing pinion angle to be adjusted after the installation of a suspension lift. Additionally the adjustable feature of our arms allows your vehicle to be upgraded...

RockJocks front polyurethane bump stop kit for JK Wrangler and Unlimited vehicles is designed for use with and is included in all of our JK 4 1/2 in. lift off road suspension systems. Kit includes billet aluminum spacers, polyurethane bump stop pucks, all necessary...

RockJocks right hand thread forged alloy steel tie rod end for their CE-9701 Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot,...

RockJocks 1 1/4 in. solid alloy steel tie rod bar only out of their Currectlync heavy duty steering system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive 22mm RH/LH threads and giant clamps. This piece is rated at 200% stronger than...

RockJocks left hand thread forged alloy steel tie rod end for their CE-9701 Currectlync heavy duty steering system is designed with 22mm x 1.5 pitch LH threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life. Includes boot,...

RockJocks 1 1/4 in. solid alloy steel tie rod only out of their Currectlync heavy duty steering system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles includes the tie rod bar, the two 22mm thread tie rod ends and giant clamps. This piece...

RockJocks forged alloy steel drag link end only from their Currectlync heavy duty drag link for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive 1 1/8 in. threads. This piece is used at the pitman arm end of the drag link and...

RockJocks 1 1/4 in. forged alloy steel drag link end only from their Currectlync heavy duty drag link for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive 1 1/8 in. threads as well as a substantially oversized junction point where the tie...

RockJocks 1 1/4 in. forged alloy steel drag link only out of their Currectlync heavy duty steering system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles features massive threaded rod ends, an oversized 1 1/8 in. threaded adjuster and giant clamps. This piece...

Tie rod end boots wear out, its inevitable. Drying, cracking, tearing can let grease escape and shorten the life of your tie rod ends. This is the direct replacement boot for all of the RockJock Currectlync steerings tie rod ends. All you have to...

RockJocks Currectlync heavy duty tie rod and drag link system for Jeep TJ, LJ, XJ, MJ and ZJ vehicles has been a staple in the off-road hobby for over 2 decades! Features include a 1 1/4 in. diameter forged alloy drag link, and 1...

For the Jeep enthusiast who wants improved steering control, the heavy duty Rancho RS5000 works on and off the road by absorbing shock loads transmitted from the front wheels to the steering system. The steering stabilizer is engineered for vehicles with oversized tires and...

This pair of RockJock rear coil springs will provide 3 inches of lift in a TJ Wrangler, or 2 1/2 inches of lift in an LJ Unlimited. These springs directly replace factory springs and are designed to work with RockJock Johnny Joint suspension systems...

This pair of RockJock front coil springs will provide 2 inches of lift in TJ Wrangler, LJ Unlimited or JK Wrangler Unlimited (4-door) applications, and 3 inches of lift in JK Wrangler (2-door) applications. These springs directly replace factory springs and are designed to...

This pair of RockJock rear coil springs will provide 3 inches of lift in a JK Wrangler or JK Wrangler Unlimited. These springs directly replace factory springs and are designed to work with RockJock Johnny Joint suspension systems or other manufacturers lift kits and...

This pair of RockJock rear coil springs will provide 5 inches JK Wrangler and JK Wrangler Unlimited (2 or 4-door) applications. These springs directly replace factory springs and are designed to work with RockJock Johnny Joint suspension systems or other manufacturers lift kits and...

This pair of RockJock front coil springs will provide 4 inches of lift in TJ Wrangler, LJ Unlimited or JK Wrangler Unlimited (4-door) application and 5 inches of lift in a JK Wrangler (2-door) application. These springs directly replace factory springs and are designed...

This pair of RockJock front coil springs will provide 3 inches of lift in TJ Wrangler, LJ Unlimited or JK Wrangler Unlimited (4-door) application and 4 inches of lift in a JK Wrangler (2-door) application. These springs directly replace factory springs and are designed...

This pair of RockJock rear coil springs will provide 4 1/2 inches of lift in a Jeep TJ Wrangler and 4 inches of lift in an LJ Unlimited. These springs directly replace factory springs and are designed to work with RockJock Johnny Joint suspension...