Wilwood

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and...

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12411 is for front engine cars and...

Brake Pedal Lever for Wilwood’s 340-13831, Forward Floor Mount Brake Pedal Assembly, with 6.00 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware.

Brake Pedal Lever for Wilwood’s 340-13832, Forward Swing Mount Brake Pedal Assembly, with 7.00 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware.

Brake Pedal Lever for Wilwood’s 340-12410, Brake, Clutch and Gas Pedal Assembly. Engineered from welded steel construction and a black e-coated finish for corrosion resistance.

Clutch Pedal Lever for Wilwood’s 330-13536 Forward Floor Mount Clutch Pedal Assemblies, with 6.00 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware.

lutch Pedal Lever for Wilwood’s 340-13834 Forward Swing Mount Clutch Pedal Assemblies, with 7.00 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware.

Clutch Pedal Lever for Wilwood’s 340-12410, Brake, Clutch and Gas Pedal Assembly. Engineered from welded steel construction and a black e-coated finish for corrosion resistance.

Replacement Gas Pedal for Floor Mount Brake / Clutch / Gas Pedal assemblies: 340-12410 / 340-12411. Engineered with welded steel construction and a black e-coated finish for corrosion resistance.

Wilwood Pedal Pivot Bolt Kit

Brake Pedal Lever for Wilwood’s 340-13835 / 340-13837, Reverse Mount Brake Pedal Assemblies, with 5.00 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware.

Clutch Pedal Lever for Wilwood’s 340-13835 / 340-13836 / 340-15073 / 340-15073, Reverse Mount Brake & Clutch Pedal Assemblies, with 5.00 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal...

Clutch Pedal Lever for Wilwood’s 340-11299 / 340-15074 Reverse Mount Brake Pedal Assemblies, with 6.25 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware. Purchase 330-11280 Pedal...

Brake Pedal Lever for Wilwood’s 340-11295 Forward Mount Brake Pedal Assembly, with 6.25 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware. Purchase 340-12043 for complete replacement...

Brake Pedal Lever for Wilwood’s 340-11299 / 340-12509 / 340-12856 Reverse Mount Brake Pedal Assemblies, with 6.25 to 1 ratio. Engineered from high strength aluminum alloy forging and with a black e-coat finish for corrosion resistance. Does not contain pedal pad or hardware. Purchase...

Stop Light Pressure Switch Pigtail. Single blade, .300” wide with 12” of 16 gauge insulated wire. Requires two for dual pole switch installation

Retaining Pin Clevis for Billet Go-Kart Calipers. Plated steel construction.

Caliper Dowel Pin for PL-HB calipers. Plated steel construction.

Wilwood’s Clevis and Pivot Pins are engineered from high strength steel alloy and a plated finish for corrosion resistance.

Wilwood’s Clevis and Pivot Pins are engineered from high strength steel alloy and a plated finish for corrosion resistance.

Wilwood pin pivot pedal 3/8-16 thd .50 ODX1.60 LG hex flange gold zinc

Pad retaining pin for .24 rotor width GP320. Plated finish.

Pad retaining pin for various Wilwood calipers, including GP320 / DLS IIIA / Billet Dynalite Single. Plated Finish.