Cognito

The Cognito Comfort Ride Torsion Bars feature a reduced rate which offers a superior ride in comparison to the stiff OEM torsion bars.Built to OEM standards, this kit is a direct replacement for the OEM bars.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet...

This kit consists of torsion bar keys and shock extenders to be used with OE or OE length shocks.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ...

This traction bar kit is a direct fit for 6.5-10 Inch of rear lift.Designed to help prevent axle wrap this traction bar kit features FK rod ends at the axle and polyurethane bushings at the frame. Durable semi-gloss black powder coat finish. Made in...

Designed to reduce body roll so you have better vehicle control and greatly improves traction for safer driving. These HD Sway Bars are developed for this specific application.Measuring 1.5 Inch in diameter and made from heat treated and hot formed 4140 chromoly steel for...

The Cognito SM Series heavy-duty (boxed Sheet Metal) construction and signature design, deliver both optimum performance and unique looks that will make your vehicle stand out in the crowd. Made in the USA.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD...

The Cognito SM Series LDG Traction Bar Kit feature heavy-duty boxed sheet metal construction and adjustability that enables you to control unwanted axle wrap, without restricting suspension travel.The all-new Cognito SM Series Limited Dynamic Geometry (LDG) Traction Bars delivers class leading performance without sacrificing...

11-19 trucks did not come with an OEM steering stabilizer, however there are mounting provisions to add a steering stabilizer. Adding the Cognito pitman and idler arm support kit removes the need for a steering stabilizer and offers more benefits than the stabilizer does....

Torsion bar keys are used to set the ride height of the front of the truck and are commonly used in leveling kits, and it is important to set the height appropriately as to leave ample suspension droop travel to maintain a good ride...

Bushing kit for older Cognito upper controls arms that had greaseable pivot bushings, 2011-2022 GM 2500/3500.This Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Silverado 2500 HD High Country 2011-2019 Chevrolet Silverado 2500 HD LT 2011-2019 Chevrolet Silverado 2500 HD LTZ 2011-2019 Chevrolet Silverado...

Upgrade your truck’s rear suspension with the Cognito 1.0-Inch Block and U-Bolt Kit, designed to provide a clean, functional lift while maintaining reliable performance and durability. This kit includes durable 1.0-inch tall cast steel lift blocks finished in a semi-gloss black powder coat, paired...

Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades.The Cognito PISK (Pitman and Idler Arm Support Kit) replace the problem components that plague factory and aftermarket steering systems on several...

The Cognito Alloy Series Tie Rod kit is a Heavy-Duty stock replacement upgrade where the inner joint incorporates an oversized alloy ball and socket. Sold as a Pair. Made in the USA.Note:Due to the larger inner joint, longer sway bar end links may be...

The Cognito Comfort Ride Leaf Spring will have more compression travel before the bottom overload activates, meanwhile maintaining an excellent ride quality via being made from high quality spring steel.Note: These leaf springs will reduce load carrying capacity by 22% on 2500 trucks. These...

The Deaver spring is a complete replacement of the OEM spring and is arched for 4 inch over stock rear lift height while maintaining excellent ride quality via being made from high-quality spring steel, a higher leaf count with thinner leaf material for a...

Looseness or Steering Play in some vehicle steering systems can often be attributed to a component known as a bell crank or idler, which supports the steering linkage.Original equipment designs utilize common sleeve bushings, which often wear out prematurely and cannot be adjusted for...

With a heavy duty design, this is still a joint and thus still a wear item. Being a press in ball joint, you would think it will be a pain to freshen up, but the Alpha Ball Joint is rebuildable and simple to do...

For model years 2011–2014 and most of 2015, GM included OEM provisions for a steering stabilizer, requiring two mounting points: one on the right side of the steering center link and one on the left side of the frame. All 2011+ models retain the...

Also Converts The Stock Style Inner Tie Rod Joint From A Ball And Socket Axial Loaded Joint To A Radial Loaded Joint Which Is Significantly Stronger And Offers More Articulation than OE. For use Only in OEM position. Not for use with lift kits...

This kit adds critical reinforcement to the idler support area of the frame, helping reduce flex and wear under load. Made from 1/4-inch plate steel, it improves steering stability and durability—especially on lifted or hard-used trucks. Designed to work with both factory and aftermarket...

The stock bottom overload spring is very harsh in spring rate, this mini pack is a progressive overload that will ride better and provide 1-2.5 inches of rear lift if one or both of the spacer blocks are removed.Get better ride quality and the...

GM Heavy Duty trucks are known for their inherent steering problems, and Cognito is known for providing the industry leading solution to these flaws with our Pitman and Idler Arm Support Kit. Now, we are proud to offer the Cognito Steering Stabilzer kit for...

The patented Cognito Alpha Pro Ball Joint is the next level, end-all be-all solution of upper ball joints. It eliminates the problematic dust/grease boot by using a durable scraper type seal that is not susceptible to damage that a traditional dust/grease boot is. Although...

The Cognito Fixed-Length Track Bar for the Ram 2500/3500 is designed specifically for 3-inch front lift applications.The track bar is responsible for centering the front axle under the vehicle. When the vehicle is lifted, the correct length track bar must be installed to re-center...