afe

Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, spring-loaded, T-bolt clamps for a leak-free seal and heavy-duty 5-ply reinforced silicone couplings for strength. Fits OEM or aFe's upgraded intercooler (46-20121-1 and 46-20161). Constructed of 2-1/2" hot side...

BladeRunner GT Series intercooler end tanks are constructed out of heavy-duty 3/16" TIG-welded aluminum plates. This BladeRunner GT Series Intercooler features a 4-1/2" bar and plate core that is extremely durable and allows for greater airflow over stock.This BladeRunner Intercooler features billet aluminum inlet...

This BladeRunner Intercooler represents the next generation of intercoolers. Designed specifically for the 2012-2016 BMW 328i (F3X) 12-16 L4-2.0L (t) with the N20 engine, this BladeRunner intercooler utilizes a 5" bar and plate core design. This design outflows the factory fin core design, while...

End Tanks: The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection. 5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater...

This BladeRunner GT Series Intercooler represents the next generation of intercoolers. Designed specifically for the Ford F-150 Raptor 3.5L (tt) Ecoboost, this BladeRunner intercooler utilizes a 3" bar and plate core design. The end tanks are constructed of 3/16" 5052 aluminum and TIG-Welded for...

Specifications: Compressor Inducer - 60 mm, Compressor Exducer - 90 mm / Trim: 45, Turbine Inducer - 70 mm, Turbine Exducer - 60 mm / Trim: 74Billet Wheel: The compressor features a gold anodized 7/14 bladed billet aluminum wheel that is lighter and stronger...

The compressor features an anodized 6+6 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to help provide quicker "spool-up" and higher air flow than the stock turbocharger. Both turbos are a direct bolt-on replacement. All connections to the...

Compressor Inducer - 38 mm Compressor Exducer - 51 mm / Trim 56 Turbine Inducer - 45 mm Turbine Exducer - 40 mm The compressor features a blue anodized 6/12 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel...

Compressor Inducer - 34 mm Compressor Exducer - 46 mm / Trim 55Turbine Inducer - 39 mm Turbine Exducer - 34 mm The compressor features a blue anodized 6/12 bladed billet aluminum wheel that is lighter and stronger than the stock cast wheel to...

Specifications: Compressor Inducer - 59.9 mm, Compressor Exducer - 85.0 mm / Trim: 49.0, Turbine Inducer - 69.8 mm, Turbine Exducer - 76.2 / Trim: 83.9 mm, Turbine Housing: 1.15Billet Wheel: The compressor features a gold anodized 9 bladed billet aluminum wheel that is...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, SmartSeal clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings. This charge pipe kit also features factory style billet aluminum quick-connect adapters with...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, smartseal clamps and heavy-duty, 5-ply, polyester reinforced silicone coupling. This charge pipe kit also features factory style billet aluminum quick-connect adapters with o-ring...

Reinforced Silicone: This intercooler hose is constructed from high temperature 5-Ply reinforced silicone material which meet or exceed SAEJ20 Standard. It uses built-in metal spiral insert to withstand extreme amounts of boost pressure while keeping from expanding. Durable Coupling: Allow for expansion, movement, and...

The BladeRunner intake heater relocation allows you to relocate the intake heater from the failure-prone factory location to in front of the intake manifold. This places the intake heater upstream of the EGR feed, avoiding EGR contamination of the intake heater. The factory grid...

Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3 in. bar and plate design that out performs OE style tube and fin core designs. The end tanks are constructed out of 3/16 in. TIG welded aluminum plate tanks that...

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner charge pope kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This charge pipe kit includes...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

End Tanks: The unique BladeRunner end tanks are constructed out of 3/16" thick aluminum plates and include two 1/8" NPT ports for sensors or water-methanol injection. 5" Bar and Plate Core Design: The use of the bar and plate core design allows for greater...

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. The BladeRunner charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This charge pipe kit features...

The intercooler tube is constructed of 3" mandrel-bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Utilizes the factory mounting locations to provide stability for a...

This coupling is constructed from high temperature 5-Ply polyester reinforced silicone material. This hose allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your pipes or other equipment break.This Part Fits: Year...

These couplings are constructed from high temperature 5-Ply polyester reinforced silicone material for better tear resistance. These hoses allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your pipes or other equipment...

This coupling is constructed from high temperature 5-Ply polyester reinforced silicone material. This hose allows for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your pipes or other equipment break.This Part Fits: Year...