aFe

The BladeRunner turbocharger is constructed of high quality A356 cast aluminum using a ported shroud compressor housing eliminating turbo bark and compressor surge. This turbocharger utilizes factory mounting points and retains the factory air control valve for a safe and hassle-free installation. The turbocharger...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

Specifications: Compressor Inducer - 60 mm/Trim: 45 Compressor Exducer - 89.7 mm Turbine Inducer - 65 mm Turbine Exducer - 58 mm Turbo Housing: 12 CM2. Billet Wheel: The compressor features a gold anodized 7/14 bladed billet aluminum compressor wheel that is lighter and...

Introducing the all new aFe Power Turbocharger Wastegate Actuator for the Dodge Diesel Trucks 03-07 L6-5.9L(td). Constructed out of black anodized CNC T6061 billet aluminum for maximum strength and style, with locking jam nut for precise boost pressure settings. This system comes preset to...

The aFe POWER BRAKELOGIC Exhaust Brake Control Module is a simple plug and play module that electronically closes off turbocharger vanes to provide engine braking. It also controls the transmission to downshift to enhance braking. This BRAKELOGIC module creates up to 130 retarding horsepower...

aFe CONTROL Tubular Ball Joint Upper Control Arm Kit Gray Toyota Tacoma 05-23 L4-2.7L/V6-3.5/4.0LThis Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2023 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2023 Toyota Tacoma SR 2016-2023 Toyota Tacoma SR5 2021 Toyota Tacoma...

Enhance your Tundra’s handling performance and style with the all-new aFe CONTROL Upper Control Arms. Although the factory control arms may be adequate with most front lift kits, the appearance of the OE arm leaves little to be desired. CNC machined from 6061-T6 billet...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 1.25-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks.High quality hardware is used for strength and durability. Installation of these...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 1.875-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of...

aFe CONTROL Front Suspension Strut Brace is designed to stiffen up your chassis and dress up your engine bay. By reducing chassis flex and deflection, the suspension is better able to do its job resulting in improved turn-in response and front-end stability. The one-piece,...

Stiffen up your chassis and give your engine bay a unique look with our aFe Control fabricated Strut Tower Bar. Made with Gunmetal Gray Powder-coated Steel, the Single Tube design is MIG welded to form a lightweight, strong brace that will increase front end...

aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in tandem with our Electronic Shock Delete kit 436-401002-N. These Modules are...

Made with high quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the...

Improve handling and eliminate sway bar preload with aFe CONTROL adjustable end links. Sway bar preload is a scenario where your sway bar is in tension when your car is at rest. Sway bar preload affect’s how the vehicle handles making it stiffer when...

Made with high quality Aurora rod ends and precision machined adjusters, these end links will make short work of dialing in your suspension. Joint articulation was designed to exceed factory range which prevents binding during operation. Equipped with right-hand and left-hand rod ends, the...

Stiffen up your chassis and give your engine bay a unique look with our aFe Control fabricated Strut Tower Bar. Made with Gunmetal Gray Powder-coated Steel, the Single Tube design is MIG welded to form a lightweight, strong brace that will increase front end...

Dramatically improve your Model 3’s handling with aFe CONTROL’s rear sway bar. With our fully adjustable rear sway bar, you can easily fine tune the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response...

Dramatically improve your Model 3’s handling with aFe CONTROL’s sway bar set. With our fully adjustable sway bars, you can easily fine tune the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response will...

Dramatically improve your Model 3’s handling with aFe CONTROL’s rear sway bar. With our fully adjustable rear sway bar, you can easily fine tune the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response...

aFe CONTROL Leveling Kits are made from 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of...

aFe CONTROL Leveling Kits are made of 6061 billet aluminum and provide a 2.0-Inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of...

aFe CONTROL Leveling Kits provide improved ground clearance while also eliminating the “nose-down rake” notorious on stock trucks. High quality hardware is used for strength and durability. Installation of these 2.0-inch leveling spacers can be done at home with the proper tools and safety...