ADD - Addictive Desert Designs

Our Winch Kit installs to our Stealth Center Mount Front Bumper for mounting a winch behind the bumper. The winch plate is made from steel, and is finished in a 2-stage hammer black powder coat. Our kit can mount up to a WARN Evo...

The Addictive Desert Designs Bomber rear bumper features a clean, modern look. The plate steel construction offers strength, while remaining low profile. The angles meet perfectly with the body lines of the vehicle to make it look as though it was there from the...

Our Black Label Ford F-150 Front Bumper enhances your truck's exterior styling with its aggressive design while providing lighting provisions for improving visibility. The slim wings and dual-stage hammer black powder coat finish contribute to the bumper's overall sleek look. For supplemental lighting, you...

"Our Front Bumper offers off-road utility and an elevated styling. The center cutout fits either five Baja Designs LP6 lights or six RIGID Industries 360 Series 6 in. round lights, or two radiused 40-inch light bars. Additional lighting options are provided by 3-inch cube...

The 2025 Toyota 4Runner Stealth Front Bumper Skid Plate is designed to work with the ADD Stealth Front Bumper F710343070103 or F710353070103 (sold separately). It adds protection to the front end of your truck and helps deflect off-road impacts. Made from heavy-duty 3/16” aluminum,...

Our molle panels are designed to store your gear and supplies utilizing molle attachment systems. They mount to multiple install points on your bed cab for a rigid fitment, and they closely follow the factory lines of your truck bed. The panels are made...

Addictive Desert Designs Bedside Accessory Mounting Panels provide a practical storage solution for trucks equipped with an 8' bed. Designed for both driver and passenger sides, the panels maximize vertical space for mounting gear while keeping the bed floor clear for larger cargo.This Part...

Addictive Desert Designs Bedside Accessory Mounting Panels provide a practical storage solution for trucks equipped with an 8' bed. Designed for both driver and passenger sides, the panels maximize vertical space for mounting gear while keeping the bed floor clear for larger cargo.This Part...

* Please Note - We recommend trimming the inner fender liners during installation for the best fitment.** Please Note - The bumper does not retain the factory skid plate or fog lights.This Part Fits: Year Make Model Submodel 2024-2025 GMC Sierra 2500 HD AT4...

Our Front Inner Fenders feature paintable raw aluminum mesh accent panels that allow for increased airflow to the engine. They offer a high-clearance design for compatibility with factory or aftermarket suspension. They can clear 37” tires with a 2.5-3” lift. Our inner fenders are...

Addictive Desert Designs 2022+ Toyota Tundra Black Label Rr Bumper - Hammer Blk w/ Satin Blk PanelsThis Part Fits: Year Make Model Submodel 2022-2025 Toyota Tundra 1794 Edition 2022-2025 Toyota Tundra Capstone 2022-2025 Toyota Tundra Limited 2022-2025 Toyota Tundra Platinum 2022-2025 Toyota Tundra SR...

Our Front Bumper features a center mount that fits four RIGID 360 6-Inch Round Lights and two side mounts that fit cube lights. Included is an aluminum front skid plate. The bumper is made from steel, and it is finished in a 2-stage hammer...

Our molle panels utilize your truck bed’s vertical storage space to mount gear with molle attachment systems. The panels are available for the driver and passenger side, so you can run one or both sets. They closely follow the OEM lines of your truck...

A simple bracket that is used as a stop for the shutter motor. If it's not installed, there may be a perpetual warning light on the dashboard.This Part Fits: Year Make Model Submodel 2019-2026 Chevrolet Silverado 1500 Custom 2019-2026 Chevrolet Silverado 1500 Custom Trail...

Our Overhead Molle Panels bring versatility to your storage capabilities in the cabin of your Bronco. With one panel spanning between the driver & passenger seats and a perpendicular panel running behind them; your gear is readily accessible while seated. A variety of attachment...

The Phantom Series Rear Bumper features a knife's edge, low-profile design to complement its aggressive stance. OEM features including the parking sensors, hitch, & trailer harness/plug are retained in the design. A license plate bracket is included, which relocates the license plate up and...

The 2025 Ram RHO Stealth Fighter Front Bumper combines aggressive style with full OEM sensor and light retention. It supports a 40" radius light bar or ten pod lights in the center, plus a pod light on each side. Heavy-duty D-ring clevis mounts come...

Our Front Bumper features a low-profile fitment and razor-sharp styling. The center light mount is compatible with four 6” round lights. The bumper provides a removable aluminum front skid plate. Our bumper is made from steel, and is finished in a 2-stage hammer black...

Our Phantom Series Rear Bumper features a low-profile knife's edge design for a sleek and trim fit that compliments your rig's factory styling. For supplemental lighting off-road, a 10-inch single row LED light bar can be mounted in the light pockets on each side....

Our Black Label Rear Bumper was designed and engineered to bring an aggressive style to your truck, while retaining all OEM features. Spare tire access is incorporated in the design, as well as the factory tow hooks and trailer hitch & plug. The license...

Our Rear Bumper provides a sleek design that retains all of the OEM features. The bumper features spare tire access, and it is compatible with the factory parking sensors, tow hooks, and trailer hitch & plug. Integrated into the bumper is a license plate...

With its stubby width and high clearance fitment, our Phantom Series Winch Front Bumper is made for aggressive off-roading & rock crawling. The knife's edge design offers an aggressive look that compliments your Jeep's factory lines. Recovery options include a heavy-duty winch mount and...

The Addictive Desert Designs Bomber Front Bumper is a slim fitting bumper for your 2020-2023 GMC 2500/3500. A modern plate steel design gives a clean look, while the full 3/16 in." aluminum skid plate cuts down on weight. Reinforced mounts for 3/4 in." D-Rings...