Bumpers, Grilles & Guards

Give your Ford Ranger an upgrade with the Stealth Fighter steel plate front bumper. A modern radius plate design allows the Stealth Fighter bumper to keep a tight fit to the front of the truck, while also providing your Ford Ranger with additional front-end...

Constructed from rugged 3/16” & 1/4” steel plate and 2” diameter steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. An integrated winch plate accommodates winches rated up to 5,500 lbs, providing added capability for off-road recovery and trail use....

Heavy duty trucks call for heavy duty bumpers. The Chevy/GMC 2500 Bomber HD rear bumper takes the rugged plate steel design from the front bumper and brings it to the rear of the truck. Our reinforced clevis mounts provide a mounting point for 3/4...

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same...

Unlike most brush guards and bumpers, ARB Bumpers incorporate a fully engineered mounting system which completely replaces the factory bumper. ARBs Deluxe Bumper selection is the most extensive. Loaded with features aimed at making remote area travel safe, no other bumper offers the same...

The Bomber is a tight fitting front bumper for the new Bronco, that follows the contours of the body perfectly. At the center of the bumper is a satin black aluminum panel that frames 3 mounting points for Baja Designs LP4 lights (also available...

Constructed from rugged 1/4” and 3/8” steel plate and 2” diameter steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. Integrated recovery shackle mounts offer convenient, secure recovery solutions. Light tabs support multiple 4-inch, 6-inch or 9-inch diameter lights, making...

High-clearance steel bumper with a sleek low-profile design that improves approach and departure angles. Supports a 10,000 lb winch, integrated shackle recovery points, and a welded bull bar. Fits a 20" dual-row LED and accommodates factory TRD skid plates. Finished in durable textured black...

Modular rear bumper designed for versatility with optional single or dual swing-out tire and accessory carriers. Features aggressive styling, OE sensor compatibility, and integrated shackle recovery mounts. Accommodates OE receiver and LED pods or flush lights. Durable two-stage textured black powder coat finish.

Compact corner protection designed to pair with the BodyArmor HiLine bumper. Provides improved clearance and additional protection while allowing space for larger tires. Includes provisions for a 6" single-row LED light bar and installs without drilling. Durable textured black powder coat finish.

High-clearance front bumper designed to improve approach angles while delivering aggressive styling. Supports a 10,000 lb winch, integrated shackle recovery points, and a welded bull bar for added protection. Fits a 20" dual-row LED and accommodates factory TRD skid plates. Durable textured black powder...

Compact steel bumper made from 3/16" and 1/4" cold-rolled steel for dependable front-end protection. OE sensor compatible with easy bolt-on installation. Includes welded D-ring recovery mounts and provisions for two cube LED lights. Finished in durable two-stage textured black powder coat.

Modern wrap-around bumper design that contours to factory body lines for added protection and style. Constructed from 3/16" and 1/4" cold-rolled steel with mesh grille protection, integrated 2" receiver, and shackle recovery points. OE sensor compatible with lighting provisions for a 30" LED bar...

Sleek wrap-around grille guard bumper that follows OE body lines while protecting the grille and headlights. Built from 3/16" and 1/4" cold-rolled steel with a mesh center screen, integrated 2" receiver, and shackle recovery mounts. OE sensor compatible with lighting provisions for a 30"...

Heavy-duty steel bumper engineered from 3/16" and 1/4" cold-rolled steel for lasting protection. OE sensor compatible with simple bolt-on installation. Includes welded D-ring mounts and lighting provisions for a 30" dual-row LED bar plus two cube LEDs. Durable textured black powder coat finish.

Durable front bumper made from 3/16" and 1/4" cold-rolled steel. OE sensor compatible and designed for easy bolt-on installation. Features welded D-ring recovery mounts and light fitment for a 30" dual-row LED bar and two cube LEDs. Finished in tough two-stage textured black powder...

Compact steel bumper built from 3/16" and 1/4" cold-rolled steel for dependable protection. OE sensor compatible with easy bolt-on installation. Includes welded D-ring mounts and provisions for two cube LED lights. Finished with a durable two-stage light texture black powder coat.

Strong and functional steel bumper engineered from 3/16" and 1/4" cold-rolled steel. OE sensor compatible with simple bolt-on installation. Equipped with welded D-ring recovery mounts and lighting provisions for a 30" dual-row LED bar and two cube LEDs. Finished in durable textured black powder...

Rugged front bumper constructed from 3/16" and 1/4" cold-rolled steel for reliable off-road protection. OE sensor compatible with a straightforward bolt-on installation. Includes welded D-ring recovery mounts and lighting options for a 30" dual-row LED bar and two cube LEDs. Durable two-stage textured black...

Heavy-duty steel front bumper built from 3/16" and 1/4" cold-rolled steel for strength and durability. Designed for an easy bolt-on installation while maintaining OE sensor compatibility. Features welded D-ring recovery mounts and lighting provisions for a 30" dual-row LED bar plus two cube LEDs....

Constructed from rugged 3/16” & 1/4” steel plate and 2” diameter steel tubing, Terra Guard’s bull bar is built to withstand the toughest conditions. Integrated recovery shackle mounts offer convenient, secure recovery solutions, while light tabs are designed to fit a range of 4-9-inch...

2016-Current Toyota Tacoma 3rd Gen, Cutting is required, All hardware needed is included, Features ready-to-paint insertable Hex-Meshes, Allows more air flow to your trans and steering coolers , Hides and protects your winch and lineThis Part Fits: Year Make Model Submodel 2016-2023 Toyota Tacoma...

Crafted from 5052 Aluminum, .190-inch wall, this skid plate is built to withstand the toughest challenges on and off the road. Brush finished, the Terra Guard Skid Plate not only ensures long-lasting protection but also adds a sleek look to your vehicle's appearance.