Differential Housings

The Yukon Dura Grip case is made for GM 12 bolt car, 3 series. (Part number YC GM12P-DG-3) This bare Dura Grip case features high-strength nodular iron construction and precision machining. It's ready to accept spider gears, clutches, and springs. GM 12P DURA GRIP...

The Yukon replacement standard open carrier case is made for Dana 44, 3.73-down, 30 Spline. (Part number YC D706024-X) This case includes carrier shims, roll pin, ring gear bolts and a cover gasket. Yukon Gear & Axle manufactures a full line of standard open...

The Yukon replacement standard open carrier case and spiders are made for Dana 44HD. (Part number YC D707382) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast...

8.8" 28 Spline standard Open bare case (incl REVERSE) 3/4" cross pin Hole. (Part number YC F880500) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and...

Loaded Differential Housing; Iron Housing w/Aluminum Cover; Incl. Pinion Flange w/93mm Bolt Circle And 110mm Driveshaft Pilot Installed;This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2024-2025 Ford Mustang Dark Horse 2024-2025 Ford Mustang Dark Horse Premium 2015-2025 Ford Mustang EcoBoost 2015-2025...

Yukon standard open differential carrier case for 8.5" Sprinter van rear, loaded with spider gears. (Part number YC SPRINTER) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is...

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for...

Yukon Gear & Axle(R) provides the highest quality aftermarket drivetrain parts in the industry. Yukon products are produced using superior materials and built to tolerances that exceed OE specifications. We do drivetrain right! Yukon manufactures high performance ring and pinions, positractions, lockers, axle upgrades,...

The Yukon Clutch guide is made for GM 7.5" and 7.6" Yukon Dura Grip. (Part number YSPCG-004) Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle...

Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226. (Part number YSPCG-003) Yukon Gear & Axle manufactures a full line...

This Yukon Trac Loc clutch guide is made for 9" Ford. (Part number YSPCG-002) Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers,...

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no...

The Yukon 8" IFS clamshell carrier, 3.91 and up, 07 and up FJ, 05 and up TAC/T100/TNDRA. (Part number YC TLCF-CS-4) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each...

Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for...

This Yukon standard open carrier case is made for Toyota V6. (Part number YC T35020) V6 standard Open case, bare. Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit...

Long-lasting Investment: The YC T34010 is built to withstand tough conditions and frequent use, making it a smart investment that will serve you well for years to come.This Part Fits: Year Make Model Submodel 2001-2007 Toyota Sequoia Limited 2001-2007 Toyota Sequoia SR5 1993-1998 Toyota...

This Yukon Replacement bare case is made for GM 8.5" and 8.6" Yukon Dura Grip. (Part number YC GM8.5-DG-3) Fits both 28 & 30 Spline applications. This carrier case is for a Yukon Dura Grip ONLY. It is NOT a replacement carrier for a...

This bare Dura Grip case features high-strength nodular iron construction and precision machining. (Part number YC GM7.5-DG-3) It's ready to accept spider gears, clutches, and springs. GM 7.5" & 7.6" DURA GRIP case, bare, 3.23 & up, 26 Spline & 28 Spline.This Part Fits:...

7.625" GM standard Open case, 3.23 & up, Large & SM windows, loaded. 28 Spline. (Part number YC G74038615) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is...

The Yukon standard open carrier case is made for GM 10.5" 14 bolt truck, 4.10 and down. (Part number YC G6258336) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each...

This is the Yukon 7.2IFS GM Standard Open loaded case 3.23 and up. (Part number YC G46002013) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and...

The Yukon Standard open loaded carrier is made for 2014 and up GM 9.5" and 9.76", 3.42 and up. (Part number YC G40090728) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of...

This Yukon Standard open loaded carrier is made for 2014 and up GM 9.5" and 9.76", 3.23 and down. (Part number YC G40090727) Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of...