Headers & Manifolds

Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.This Part Fits: Year Make Model Submodel 2026 Cadillac Escalade Base 2021-2026 Cadillac Escalade...

This system produced gains of up to +18 HP and +25 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8" mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined 304 stainless...

Construction: These unique up pipes are constructed of 2" mandrel-bent 304 stainless steel tubing with a .120" wall for strength and durability. 2" Inner Liner Flex Pipes: The up-pipes utilizes heavy duty 2" flex tubes with internal inner liner. Leak-Free Seal: High quality 3/8"...

Twisted Steel 1-3/4 IN 304 Stainless Headers w/ Titanium Coat Finish Dodge Challenger 15-23 V8-6.2L (sc)/6.4L HEMIThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2019 Dodge Challenger R/T 392 2016-2023 Dodge Challenger R/T Scat Pack 2021 Dodge...

This system produced gains of up to +9 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This coating combination reduces the outside...

This system produced gains of up to +9 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined flanges...

Unleash more torque and horsepower with this Twisted Steel Header for your RAM 1500 HEMI. Optimized, 1-5/8" mandrel bent, 304 stainless-steel tubing improves exhaust flow for quicker throttle response and overall performance. Mandrel bent, 1-5/8" 16-gauge 304 stainless steel tubing construction for unrestrictive flow...

Unleash torque and horsepower with this Twisted Steel series header for your 24 valve Cummins. 1-3/4" head pipes stepped to 2" mandrel bent 304 stainless steel tubing and a 1/2" laser cut T-3 divided flange builds quicker turbo boost, improves throttle response and overall...

The complete gasket kit includes all required components for the removal and replacement of the EGR cooler.This Part Fits: Year Make Model Submodel 2004-2005 Ford Excursion Eddie Bauer 2004-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2004-2005 Ford Excursion XLT 2004-2007 Ford F-250 Super...

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 23hp and 57lbs x ft. torque while increasing air flow 73-percent over the factory turbo inlet. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature...

The aFe POWER BladeRunner GT Expansion Tank offers a premium upgrade to the factory expansion tank in your Dodge Charger/Challenger. Say Goodbye to the aging plastics of the stock tank, susceptible to yellowing and brittleness over time, affecting both appearance and reliability.BladeRunner GT Expansion...

These manifolds have both the inlet, and the outlet ports machined to match the factory gaskets. This allows for maximum flow, without compromising gasket performance. These manifolds have 25% Thicker walls than the crack-prone factory manifolds. The increase in thickness increases the rigidity of...

These manifolds have both the inlet, and the outlet ports machined to match the factory gaskets. This allows for maximum flow, without compromising gasket performance. These manifolds have 25% Thicker walls than the crack-prone factory manifolds. The increase in thickness increases the rigidity of...

Bolt on diesel power with aFe's BladeRunner exhaust manifolds for your 08-10 6.4L Powerstroke. These ported ductile iron manifolds will reduce pressure loss to your turbocharger for increased performance and improve throttle response. The manifolds are compatible with all factory equipment including AC lines,...

Bolt on instant performance by upgrading or replacing your restrictive, cracked factory manifold with this BladeRunner port matched manifold. Designed to outflow the stock manifold by 12% for improved throttle response, the BladeRunner manifold has both the inlet and the outlet ports machined to...

Machined Ports: These manifolds have both the inlet and the outlet ports machined to match the factory ports. This allows for maximum flow, without compromising the integrity of gasket sealing. Auxiliary Ports: An Exhaust Gas Temperature (EGT) probe port is incorporated into each manifold...

The new ATLAS exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4-inch aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving...

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...

aFe Power is pleased to announce the release of the new ductile iron BladeRunner exhaust manifold for the 03-07 Dodge RAM Diesel Trucks L6-5.9L (td). In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 23%, improving performance and throttle response. The...

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange...