Light Accessories and Wiring

Rock-Slide Engineering - Step Lights

Standard relays included with RIGID wire harnesses are 12V. If your RIGID LED light project has a 24V electrical system, you will need to replace the 12V relay with this 24V relay for proper functionality.

Standard relays included with RIGID wire harnesses are 12V. If your project has a 24V electrical system, you will need to replace the 12V relay with a 24V relay for proper functionality.

This RIGID 3 amp flasher module provides seven flashing options for your LED lighting components. It is easy to install and works off of the auxiliary switch to your lights. This model features the following modes: Single Simultaneous: Both sides flash once simultaneously, followed...

The Radiance 3 wire multi-trigger harness is designed specifically for RIGID Radiance LED light bars. Equipped with two independent circuits for an easy install, circuit one is designed for higher amperage and utilizes a relay to power the primary LEDs on the Radiance light...

This 14 foot/4.3 meter wiring harness is designed to connect a pair of D-Series LED lights to your 12V electrical system. It features battery terminals on one end and Deutsch connectors on the other to connect to the lights. It incorporates an inline fuse...

This 11 foot/3.35 meter wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder,...

This 11 foot/3.35 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse...

This 33 Foot/10 meter harness for your RIGID LED Lights has an easy to use three position switch: On/Off/Auto when in reverse and is used for SR-M and SR-Q Series Back Up Kits.

This 13 foot/4 meter wiring harness is designed to connect a single LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse...

This three position switch features a lighted cherry rocker with a protective rubber boot and is a great addition to any RIGID lighting system. This RIGID switch allows for on, off, or auto when the vehicle is in reverse. This product requires a 3/4...

Use RIGIDs Pendant Switch Kit if you don't want to drill a hole in your vehicle to mount a switch. This Kit works great for powersports applications. Ultra-durable, waterproof, dust-proof and impact resistant. LED on/off indicator light. Kit includes switch, 3M VHB mounting tape...

KC LKZ M12-1.75 Light Locks provide anti-theft security for all KC Carbon POD LED and Carbon HID Lights. Made from 100% CNC machined steel with an anti corrosive Zinc coating for long lasting performance and durability.

KC LKZ M10-1.5 Light Locks provide anti-theft security for KC FLEX ERA 3, FLEX ERA 4, LZR LEDs, KC Gravity G34/G46/Pro6/Pro-Sport LEDs, and KC FLEX LED Singles/Duals. 100% CNC machined steel with an anti-corrosive Zinc coating.

KC LKZ M8-1.25 Light Locks provide anti-theft security for all FLEX LED and Gravity LED Pro6 Light Bars. Made from 100% CNC machined steel with an anti corrosive Zinc coating for long lasting performance and durability.

KC Hilites 6315 Relay Wiring Harness Kit allows for quick installation for up to two 130w lights. Harness complete with 40A relay, illuminated rocker switch kit, fuses and mounting hardware to handle up to 260w.

KC 6311 FLEX ERA 3-Pin DT Wiring Harness Relay Kit allows for quick installation for up to two 130w lights. Harness complete with 40A relay, 3 position illuminated rocker switch kit, fuses, and mounting hardware.

Wiring Harness for Two Lights w/ 2-Pin Deutsch Connectors, KC #6308For 2 Lights up to 55w Each (Maximum 110w total)Weather Proof Sealed 2-Pin Deutsch Connectors30 Amp Ilumintaed Switch w/ PanelNo Relay Required

The KC Universal Wire Hider in 25-meter length is perfect for vehicle builders, install shops, and others who need lengths differing from our standard retail kit

The KC Universal Wire Hider is as simple as it sounds. It is a 3.3 ft strip of rubber extrusion that has an internal channel to help you hide your wires for a clean install of off-road lights and other accessories.

Amber Light Shield for KC(R) FLEX ERA(R) 1 Lights. Take your FLEX ERA 1 lights' performance to new heights with amber light shields providing additional protection from the elements allowing you to Adventure Further(R).

Black Light Cover with KC logo for KC(R) FLEX ERA(R) 1 Lights. Protect your FLEX ERA 1 lights when not in use.

KC(R) FLEX ERA(TM) 3 AMBER LIGHT SHIELD FOR ADDED PROTECTION AND VISIBILITY KC's FLEX ERA(TM) 3 lights and light bars are one of the most capable LED lights available today. Take your FLEX ERA 3 lights' performance to new heights with amber light covers...