Wilwood Brakes

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Spindle Bracket Bolt Sleeve. With a .437” ID, .479” OD and .388" length. Made from high strength steel alloy.

Individual spacers for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer are made from high strength aluminum alloy. Spacers widths will vary in application based on caliper. Please see accompanying drawing for offset applications.

Slide Pin Bolt Sleeve for many Wilwood Floating calipers. Fits D52 / D154 /DH /HM and HC calipers. Made from high strength steel alloy and plated for corrosion resistance

Bridge Bolt Tubes for various Wilwood calipers with a .260” ID, .500” OD and various lengths for specific caliper styles and rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance or a bright polished finish.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Narrow Dynalite 4 Piston and Dynapro calipers using a .63” to...

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4 Piston and Dynalite / Dynapro Single caliper using a...

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s conventional stainless steel pistons from 1.62” to 1.88” diameter. Spring use in...

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Wilwood Internal Drum Style Parking Brake Hardware Kit

Wilwood DP6 Series Caliper Retainer Pin & Clip Kit

Wilwood Brake Pad Shims (4 Pack)

Wilwood Titanium T-Nut Kit Dynamic 45062 8 Pack

SPACER,BRAKE SWITCH,.56 IDx.81 ODx.13 THK,NYLON

Wilwood Electronic Parking Brake Caliper Switch Kit w/ On/Off Sticker

SPACER,BRACKET,CALIPER,.397 ID x.875 OD x.525 LG