Wilwood Brakes

SPACER,BEARING,INNER,HUB,51-59 CHEVY 1/2 TON,1.825 ODx1.282 IDx.320 THK

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (8.80” Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Convenient set of four or part # 310-3634, CLIP,RETAINING,PIN for DP6, D8, TX6 and Aero calipers.

Push Rod Spacer for use in Wilwood’s Aluminum Tandem Master Cylinder. Used when a deep whole push rod retention is not required. Used with most power brake applications. With a 1.62” length, .468” diameter and fully radiused ends, made from high strength aluminum alloy.

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 6 x 5.50” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy...

Bearing and Spindle Spacer for various brake kit applications. Engineered from alloy steel. Dimensions vary by application.

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a 5mm (0.197’) thickness. Engineered from high strength steel alloy and with a plated finish.

Rotor wear plates are used to prevent button “dig-in” and wear on Aluminum Dynamic Hats. Manufactured form stainless steel alloy for maximum abrasion resistance.

Caliper Rebuild Kit for Dynapro Single and Dynalite Single Calipers with 1.75” pistons. Contains piston seals, wear plates, bleed screws, pad retainer and cotter pin to service both styles of calipers. Parts are sufficient for one caliper only.

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with lug mount FDL caliper kits....

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with lug mount FDL caliper kits....

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with lug mount FDL caliper kits....

Spacer kits for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer kits come with spacers, bolts and washers. Kits vary in application in caliper applications. These specific kits are used with lug mount FDL caliper kits....

Replacement rotor adapter for Wilwood Starlite XD55 hubs. Adapter is supplied with a 5 x 4.50” bolt pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy and hard anodized...

Stop Light Pressure Switch, dual pole with a 1/8th pipe male inlet. Circuit turns on at 60-100 psi. Used in part #260-11179 Combination Proportioning Valve assembly. Plated steel construction.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for GP320 Calipers.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for GP320 Calipers.

Replacement left front rotor adapter for Sprint & Midget front hubs. Adapter features a hub mount bolt circle of 3 x 5.00” and will mount 9 x 7.00” bolt circle rotors. Made from high strength aluminum alloy with a corrosion and wear resistant Type...

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a .090 thickness. Engineered from high strength steel alloy and with a plated finish.